فعالیت ها و خدمات
از جمله فعالیت ها و خدمات واحد پروژه می توان به موارد ذیل اشاره نمود :
هدف واحد پروژه
ساخت تابلو
تابلو ها مطابق با آخرین تکنولوژی ریتال آلمان طرح TS8 می باشد که دارای IP 55 و رنگ الکترواستاتیک RALL 7035 فوم درب تزریقی می باشد. این تابلوها ضد گرد و غبار و ضد آب می باشد و همچنین دارای تاییدیه اداره آزمایشگاه های صنعت برق ایران می باشند.
نرم افزار طراحی تابلو
برنامه نویسی
The activities and services of the Project Unit include the following:
Project Unit Objectives
Panel Manufacturing
- The panels comply with the latest Rittal Germany TS8 design technology, featuring IP 55 protection and RALL 7035 electrostatic paint with injected door foam. These panels are dust-proof and water-resistant and hold the approval of the Iran Electrical Industry Laboratory Authority.
Panel Design Software
Programming
Installation, Inspection, and Factory Acceptance Test (FAT)
This section includes all of the company’s activities, such as: testing, adjustment, and installation of all panels, as well as the preparation of equipment and accessories. Wiring and cabling are also performed during the installation and implementation phase, considering design details and ensuring easy accessibility to optimize activities.
• Factory Acceptance Test (FAT)
- The FAT must be conducted at the manufacturing company, involving all hardware and software components.
- The testing and inspection procedures must verify the correct functioning of the hardware and software, as well as their compliance with the required specifications.
- For completion, a report of all internal tests and inspections must be made available to the inspector.
- The tests and inspections to be performed during the FAT are as follows:
- Checking mechanical dimensions and specifications.
- Checking the specifications, technical numbers, and quantity of all parts and modules according to the approved contract.
Site Acceptance Test (SAT)
- This section involves Commissioning activities to bring the process to the standards of a suitable and safe process.
- The Electrical Loop Test is the top priority in this section.
- To ensure correct functionality, the PLC performance must be tested both in the network and individually.
- The control loop must be commissioned in closed-loop operation with the factory’s operation.
Documentation
All technical points and design phases, as well as client approval, must be formally registered as a document. The client’s cooperation is required for the preparation of these documents.
Some of these documents include:
نمونه هایی از پروژه های انجام شده را می توانید از این قسمت مشاهده فرمائید.