Qeshm Voltage Company's productions.

PLC Siemens training set, table-top mode, S5 model
PLC Siemens training set, table-top mode, LOGO model
PLC Siemens training set, table-top mode, S7-200 model
PLC Siemens training set, table-top mode, S7-300 model
PLC Siemens training set, table-top mode, S7-300 model, compatible with
network and remote I/O
PLC Siemens training set, table-top mode, S7-300 model, compatible with
PROFIBUS DP network.
PLC Siemens training set, table-top mode, S7-400 model
Siemens training set, AC motor rotation control, table-top mode, Micro Master
Inverter model
Siemens training set, AC motor rotation control, table-top mode, Sinamic
Inverter model
Siemens training set, FULL model, full stand mode; including ( Drive AC,S7200,
S7300, LOGO), Touch panel Industrial networks and WINCC monitoring
Instrumentation training set
Authorized Distributor in training equipment
Produce Of control and Electrical panel

PLC S5
CPU 100U Specifications:
1. Equipped with RS485 port for connecting to the computer or to the network
for programming.
2. Equipped with 8 digital inputs and outputs.
3. Equipped with 4 analogue inputs and 2analogue outputs (0..10V or +/-10V or 4..20mA
or 0..20mA or +/-20mA).
4. Equipped with a memory of 8 K Byte.
5. Equipped with BUS UNIT.
6. Equipped with the connective cables for connecting to the computer.
POWER SUPPLY
Having a switch charger of 24 V.
Functions:
1. Equipped with keys connected to some PLC digital inputs.
2. Equipped with a LED for presenting the circumstance of some PLC digital
outputs.
3. Equipped with potentiometers for supplying the changeable voltage of some
PLC analogue outputs.
4. Equipped with seven segment for presenting the amount of the voltage of
some PLC analogue outputs.
Digital board connecting PLC to functions.
Analogue board connecting PLC to functions.

PLC S7-200
CPU 224 Specifications:
1. Equipped with one PPI port for connecting to the computer for programming
or to the PPI or MPI network and USS MODBUS.
2. Equipped with 14 digital DC inputs and 10 digital DC outputs.
3. Equipped with 4 analogue inputs and 1 analogue
output (0..10V or +/-10V or 4..20mA or 0..20mA or +/- 20mA).
4. Equipped with 12/16 KB programming
memory and 8KB output memory.
5. Equipped with 256 Counter and 256 Timer.
POWER SUPPLY
Having a DC switching charger of 24 V and the
relevant connective cables for connecting to the
computer.

Functions:
1. Equipped with keys connected to some PLC digital inputs.
2. Equipped with a LED for presenting the circumstances of some PLC digital
outputs.
3. Equipped with potentiometers for arranging and determining of set point.
4. Equipped with seven segment for presenting the amount of the voltage of
some PLC analogue outputs.

Digital board connecting PLC to functions.
Analogue board connecting PLC to functions.

PLC S7-300
CPU 313C Specifications:
1. Equipped with MPI port for connecting to the computer for programming and
to the MPI network.
2. Equipped with 24 digital inputs and 16 digital outputs.
3. Equipped with 4 analogue inputs and 2 analogue outputs( 0..10V or +/-10V or
0..20mA or +/-20mA) or 4..20Ma.
4. Equipped with one R-2L (600 Ohms) or RTD-2L (PT100) for measuring the temperature.
5. Equipped with 3 FAST Counter30KHZ for connecting to the Pulse Encoder.
6. Equipped with a memory of 32 K Byte.
7. Equipped with 256 Counter, 256 Timer and 256 byte bit memory.
8. Equipped with Micro Memory Card.
9. Equipped with 2 Front Connectors and 40 pins.
10. Equipped with relevant connective cables for connecting to
the computer.
POWER SUPPLY
Having a DC switching charger of 24V.
Functions:
1. Equipped with keys connected to some PLC digital inputs.
2. Equipped with a LED for presenting the circumstances of some
PLC digital outputs.
3. Equipped with potentiometer for supplying the changeable voltage of some PLC
analogue input.
4. Equipped with seven segment for presenting the amount of the voltage of PLC
analogue outputs.
Digital board connecting PLC to functions.
Analogue board connecting PLC to functions.

PLC S7-300 Compatible with network and I/O remote
CPU313 C2DP Specifications:
1. Equipped with MPI port for connecting to the computer for programming or to
the MPI networks.
2. Equipped with industrial network port (PROFIBUS DP) for connecting to the
monitoring networks.
3. Equipped with ET200 network cards for connecting inputs and outputs to PLC
by network.
4. Equipped with 16 digital and 2 analogue inputs and 16 digital and 2 analogue
outputs (0..10Vor +/- 10V or 20mA or 0..20mA or+/-20mA).
5. Equipped with 3 FAST Counters, of 30KHZ in order to be connected
to the Pulse Encoder and to the memory of 64 Kbytes.
6. Equipped with 256 Counter, 256 Timer, 256 byte bit memory
and Micro memory card.
7. Equipped with 2 Front Connectors, 40 pins and input/output cards.
8. Equipped with the relevant connective cables for connecting to
the computer and also with the PROFIBUS network connectors and cables.

POWER SUPPLY
Having a DC switching charger of 24 V.
Functions:
1. Equipped with keys connected to some PLC digital inputs.
2. Equipped with a LED for presenting the circumstances of
some PLC digital outputs.
3. Equipped with potentiometer for supplying the changeable voltage of some PLC
analogue input.
4. Equipped with seven segment for presenting the amount of the voltage of PLC
analogue outputs.
Digital board connecting PLC to functions.
Analogue board connecting PLC to functions.

PLC S7-300 Compatible with Profibus network
CPU315 2DP Specifications:
1. Equipped with MPI and DP ports for connecting to the computer for programming
or to the Profibus network.
2. Equipped with 16 digital inputs and 16 digital outputs.
3. Equipped with 2 analogue inputs and 2 analogue outputs (0..10V or +/- 10V or 4..20mA
or 0..20mA or+/-20mA).
4. Equipped with a memory of 128 Kbytes.
5. Equipped with 256 Counter, 256 Timer, and 256 byte bit memory.
6. Equipped with Micro memory card.
7. Equipped with 2 Front connectors, 40 pins+ 1 Front connector,
20 pins.
8. Equipped with some input/ output cards.
9. Equipped with the relevant connective cables for connecting to
the computer.
POWER SUPPLY
Having a DC switching charger of 24V.
Functions:
1. Equipped with keys connected to some PLC digital inputs.
2. Equipped with a LED for presenting the circumstances of some PLC digital outputs.
3. Equipped with potentiometer for supplying the changeable voltage of some PLC
analogue input.
4. Equipped with seven segment for presenting the amount of the voltage of PLC
analogue outputs.

Digital board connecting PLC to functions.
Analogue board connecting PLC to functions.

PLC S7-400
CPU 412-1 Specifications:
1. Equipped with MPI port for connecting to the computer for programming or to the
MPI network.
2. Equipped with 32 digital inputs and 16 digital outputs.
3. Equipped with 8 analogue inputs and 8 analogue outputs (0..10V or +/- 10V or ..20mA
or 0..20mA or+/-20mA).
4. Equipped with a memory of 144 Kbytes.
5. Equipped with 256 Counter, 256 Timer, and 256 byte bit memory.
6. Equipped with Micro memory card for saving programs for a
long period of time.
7. Equipped with the relevant connective cables for connecting to
the computer.

POWER SUPPLY
Having a DC switching charger of 24V and back up battery.
Functions:
1. Equipped with keys connected to some PLC digital inputs.
2. Equipped with a LED for presenting the circumstances of some PLC digital outputs.
3. Equipped with potentiometer for supplying the changeable voltage of some PLC
analogue input.
4. Equipped with seven segment for presenting the amount of the voltage of PLC
analogue outputs.

Digital board connecting PLC to functions.
Analogue board connecting PLC to functions.

Drive AC
Micro Master Drives Specifications:
1. Over current restriction with RAMP UP and RAMP DOWN, Slip compensation.
2. Equipped with 3 digital and 1 analogue inputs; the analogue one can be changed to
the digital input and also with a digital output in face of relay. We can use it as
FULT by parameterizing.
3. Equipped with DC brake.
4. Compatible with programming V/F curve.
5. Compatible with connecting to PLC and PROFIBUS network and also equipped with a
port of RS 485 for serial connection.
6. Compatible with programming by PC.
7. Compatible with programming by BOP (Manual).

Protection Features:
1. Over load current capability (150%) for 60 s, cycle time 300s.
2. Over voltage, Under voltage protection.
3. Over temperature protection.
4. Earth fault protection.
5. Short-circuit protection.
6. Locked motor protection.

Motor specifications:
-Siemens Asynchronous AC motor (3 phase) with speed of 1370 RPM.
PC INTERFACE-
-Cables and software for programming inverter by computer.

Drive AC
Sinamics G110 Drives Specifications:
1. Over current restriction with RAMP UP and RAMP DOWN, Slip compensation.
2. Equipped with brake.
3. Equipped with 3 digital and 1 analogue inputs and 1 digital output.
4. Equipped with DC brake.
5. Compatible with programming by V/F curve.
6. Compatible with connecting to PLC (In this case Drive shall be used as SLAVE
and PLC shall be used as MASTER).
7. Equipped with a port of RS 485 for serial connection.
8. Compatible with programming by PC.
Motor Specifications:
- Siemens Asynchronous AC motor (3 phase) with speed of 1370 RPM.
- Basic operator panel (BOP)
-Equipped with a panel for manual programming , commanding and presenting the
drives circumstances.
- PC INTERFACE
- Cables and software for programming inverter by computer.

Specification of PLC Siemens training set- Full stand mode
This set is included of two parts:

A) Vertical Panel
1. PLC S7 300 (CPU314C2DP)
2. PLC S7 200 (CPU224 XP)
3. Mine PLC LOGO
4. SIMATIC HMI
5. Micro MASTER 440
6. AC Motor
7. Digital sensors (Opto, Inductive, Capacitance and Magnetic sensors).
8. Analogue sensors (PT100 and Load cell)
9. Valve of 2/3 and 3/4 .
10. DC Motor and Generator (which are coupled to each other).
11. Command conductors.
12. Relay board
13. Adapter (12V) SITOP (5A)
14. Industrial computer that all the relevant soft wares
are installed on it.

B)
Oblique Panel (Operative Panel)
1. On/ Off Key (For actuating digital inputs)
2. Potentiometer (For actuating analogue inputs)
3. Seven segment (For presenting the amount of the voltage of analogue inputs).
4. LED (For presenting the circumstances of digital outputs).