Vector Control Compact

(0 رای‌ها)
نویسنده :  

The SIMOVERT MASTERDRIVES Vector Control series of converters consists of modular, high-performance components.

 

Application

SIMOVERT MASTERDRIVES frequency converters

Vector Control; Compact PLUS / Compact and chassis units

The SIMOVERT MASTERDRIVES Vector Control series of converters consists of modular, high-performance components that can be combined for individual applications.

The SIMOVERT MASTERDRIVES are designed in two versions:

•    converters for connection to a 3-phase AC system,

•    inverters for connection to DC buses which are supplied with power by rectifier or rectifier/regenerative units.

The SIMOVERT MASTERDRIVES are available, among others, as compact units and chassis units.

•    Compact PLUS units

are the specialists for limited space conditions. The “BOOKSIZE” format in IP20 degree of protection and the ideal connection system of the units makes the design of extremely compact

multi-motor drives possible. Compact PLUS units can be mounted into 300 mm deep cabinets.

•    Compact units

are designed in the space-saving “BOOKSIZE” format with IP20 degree of protection. The units are simply suspended from a standard DIN G rail and attached to the bottom of the unit with a

screw fastening.

Compact units can be built into cabinets with a depth of ≥ 400 mm.

•    Chassis units

are designed with IP00 degree of protection:

The covers conform with the safety regulations to VDE 0113 Part 5 and VDE 0106 Part 100 (VBG4). IP20 degree of protection can also be achieved later with an optional assembly kit.

The compact and chassis units can be installed without any space between them.

Technical specifications

 

 

General technical data for Compact PLUS, compact and chassis units

Cooling type

Forced ventilation using an integral fan

Air-cooled

 

Permissible ambient and cooling-medium temperature during operation

0 °C to +40 °C (reduction curves for +40 °C < T < +50 °C)

Water-cooled (for compact and chassis units only) 

 
  • Cooling water inlet temperature

5 °C to +38 °C

  • Permissible ambient temperature during operation

0 °C to +40 °C

Permissible ambient temperature during storage and transport

-25 °C to +70 °C

Installation altitude

≤ 1000 m above sea level (100 % load capability)

> 1000 m to 4000 m above sea level (reduction curves)

Humidity rating

Relative humidity ≤ 85 %, moisture condensation not permissible

Climatic category

Class 3K3 to EN 60 721-3-3

Environmental class

Class 3C2 to EN 60 721-3-3

Insulation

Pollution degree 2 to DIN VDE 0110-1 (HD 625.1 S1: 1996), moisture condensation not permissible

Overvoltage category

Category III to DIN VDE 0110-1 (HD 625.1 S1: 1996)

Degree of protection

To EN 60 529: Compact PLUS and compact units: IP20; chassis units: IP00 (IP20 optional)

Protection class

Class I to EN 61 140

Shock protection

To DIN VDE 0106 Part 100 and BGV A2 (previously VBG 4)

Radio-interference suppression

To EMC product standard